Drain the radiator, disconnect the hoses from the radiator, remove any shrouds over the top of the radiator, unbolt the radiator, and pull up.
Yes you can but your check engine light will stay on and the truck won't pass emissions tests.
Or remove lower radiator hose
To replace a radiator on a 200 Buick Regal is not really that hard. You will need to remove all belts attached to the radiator and then unscrew the bolts that are holding the radiator. Make sure the car/truck has been off for a long period and the radiator is not hot.
Drain the water from the radiator. Remove the radiator hoses. Remove the radiator stabilizer arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
Drain the water from your Mazda Protege radiator. Remove the hoses from your radiator. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
That would be the 4L60E transmission.
Should be at the bottom or rear of radiator or remove lower radiator hose
With a wrench!!
Drain coolant Remove transmission cooling lines Remove upper and lower radiator hoses Remove upper mounting bolts Pull radiator up from support cradle
I find out the hard way, and the best way to do it is by removing the mechanical fan first, which also is going to take some skills and patience, but is possible.
upper or lower?
No