how do I remove my air bag from my mercury sable
First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on. First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on.
You have to remove the spring clip from the solenoid valve on the air bag and turn it left, which will bleed the air out of that air bag you have to do this to each air bag individualy.
you remove it
disconnect battery, remove air bag fuse and yellow arming wire to each air bag you are disconnecting.Be Carefull !
Under the air bag. First remove air bag and one clip will be holding module into column
Need to clarify what you are asking. The Horn Relay is inside the relay/fuse box behind the battery. The Horn Switch is located in the air bag in front of the steering wheel. You must replace the air bag module to replace the Horn Switch. The Horn switch grounds the relay which then powers the horns.
air bag sensor
It is illegal to remove the air bag from any vehicle.
It is illegal to remove the air bag from any vehicle.
You take it out
Yes, by use of the ignition key in lock on side of dashboard by drivers door.