0
To install fog lights you need kit containing one set fog lights, wiring harness, relay with fuse and switch with internal light. I bought a mounting bar that bolts on behind number plate so as no holes in bumper. Attach mounting bar and lights to bar. locate on / off switch so it can be easily be reached by driver. Fog lights are wired through low beam of head lights. They should only work on low beam. Locate relay close to car battery. Relay allows a full 12 volts to lights so they operate at max power. Relay has four terminals No 30 power from battery positive No 87 fog lamps No 85 Earth No 86 switch Run dual cable from switch red and black. Red to 86 of relay black to power wire in head light harness(low beam). Solder black wire to wire in head light low beam and then tape bare wires.You will need test lamp to find correct wire in head light harness for low beam.When you screw relay to body of vehicle attach wire from 85 to screw and that will earth relay. Now for Fog. The lights probably have plastic backs. There will be two wires coming out of fogs lights check which one is earth ( not from globe the other one) and attach to good earth. Run other wire from globe to 87 on relay. Now run red wire from 30 to battery positive. When the switch you have installed is turned on and headlights are on low beam fog lights will turn on. The switch allows you to turn on fog light when needed. The head light harness is live even when light switch is turned off so make sure after you have used fog lights that you turn off switch you have installed. Make sure switch you have installed has light attached so if you do forget to turn off lights you will notice light in switch. Good luck
Add your answer:
Earn +20 pts
Where do you find picts of how to install fog lights on a 2000 Honda Civic?
need diagram to install 2000 Honda civic syder fog lights
How do you install fog lights in a car?
Fog lights use special brackets which sit recessed on a 2001 Chevy Cavaliers bumper. To install the fog lights mount the units into the bumper brackets. Then splice the fog lights into the existing wire harness. Use a switch if necessary.
Can you install factory fog lamps on a 2003 q45 in the front bumper holes?
yes you can install factory fog lights on a non fog light car,however, there may be some fabricating of brackets to mount the fog lights to.also you must either install your own switch or wire them directly into your parking lights.
How do you install a fog light on a 07 dodge charger?
By buying fog lights and installing them.
Can you install fog lights on a 2004 impala?
Yes, fog lights can be installed in the 2004 Chevy Impala. These lights come standard in this make and model.
How do you install fog lights on a 2004 Toyota corolla?
with your hands
Is the Base Highlander wired for fog lights?
I have a 2014 Toyota Highlander LE model, I asked the dealership to install fog lights, I would like to know how long does it take for them to install them?
How do you install fog lights on a 2001 Daewoo Lanos Sport?
Follow the insturctions that will come with the lights.
How do you install fog lights on a 2007 Kia Sorento?
Very Carefully!!!!
How do you replace fog lamp bulb on a ve commodore?
eazy way to change fog lamp on ve commodore 2007
Has anyone installed fog lights on a 2007 Honda Element EX?
fog light installgo to cheap Honda parts .com look for fog lights and click install inst. i did it good luck.
How do you install original fog lights on a 2003 Toyota Camry?
To install the fog lights on a 2003 Toyota Camry you must first look inside the booklet and see where the foglights go and how they go on. And however the book says to put them on that is how you should do it.
