Set it to Cool. Then measure the voltage at the low voltage terminal strip on the furnace/air handler, R to C should read 24 volts, R to ground should read something, R to Y should read zero and both indoor and outdoor units should be running. If they are not, turn the power OFF and place a jumper wire between R and Y on the terminal strip, then restore the power. If everything starts, either the thermostat is bad or there is a broken wire between the air handler and the stat. To prove the wire is good do this same test at the stat, if everything starts after jumping R to Y the wire is good and the stat is the problem. Prior to all of this, make sure the outdoor unit circuit breaker is on , the fuses outside are good and power to the condensing unit is present.
Wiki User
∙ 15y agocan a faluty thermostat affect your central ac working?
If it totally dies, the AC unit will not operate. If it is "failing", the unit will not maintain the proper temperatures.
1. Bad fan motor 2. Bad fan capacitor 3. Contactor bad 4. No power to outdoor unit.
No. The thermostat is not likely to be the cause.
yes, if the ac unit has 2 zones, you will need a thermostat for each zone. if the ac unit provides both ac and heat, you can connect a thermostat for each. not a good way to go. better to use 1 therm in that case that has a heat-cool switch on it so the unit is not putting out both heat and ac at the same time.
You obviously have a problem with your ac unit which cannot be dianosed here.
No.
Bad Thermostat
Your a/c unit uses different relays(switches) that are energized when the thermostat calls for A/C.
If an old AC unit never shuts off when the thermostat is set to auto, it could be due to a faulty thermostat, a malfunctioning relay switch, or even an issue with the refrigerant levels. I recommend contacting a licensed HVAC technician to diagnose and repair the problem to ensure it is fixed correctly and safely.
Improperly programmed programmable thermostat.
Bad compressor