The Oil is drained by removing a plug in the oil pan, and letting it run into a pan. The filter is screwed to the side of the engine. After the oil is drained and the filter changed, add oil and check frequently to prevent overfilling.
The vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed.
No
Just a socket wrench that will fit on the lid for the filter because it is a an actual filter cannister not the usual steel filter
Place a drip pan below the oil pan and oil filter. Remove the oil pan plug. Drain the oil into the oil pan. Replace the plug to the oil pan. Turn the oil filter to the left, to remove. Fill the oil filter with oil and replace it to its original position. Fill the motor with oil.
Bottom of the engine on the oil pan.
With engine oil filter change ( 6 quarts ) according to the Owner Guide
According to the 2008 Mercury Milan Owner Guide : In the power distribution box ( which is " live " ) located in the engine compartment near the battery ( fuse # 22 is a 20 amp fuse for the console power point )
According to the 2008 Mercury Sable Owner Guide : For the 3.5 litre V6 engine : With engine oil filter change : ( 5.5 U.S. quarts of 5W-20 engine oil )
17.5
With engine oil filter change ( 6 quarts / 5.7 liters ) according to the Owner Guide
According to the 2008 Mercury Sable owners manual : ( the Motorcraft FL-400-SB12 engine oil filter is used for the 3.5L V6 engine )
According to the 2008 Mercury Grand Marquis Owner Guide : With engine oil filter change : The 4.6 liter V8 engine takes ( 6.0 U.S. quarts / 5.7 liters of 5W-20 )