Toyota Yaris wing indicator/repeater is seal unit (it can't be opened), you have to replace the whole thing.
You can not just change the bulb. You need the whole clock
i wanted to know how to change head light bulb of 99 cavalier
Front or rear? Just change the bulb or change the lens housing?
take the bulb out
When the dash lights dim on the Nissan Pulsar SS 99 with the use of the turn signal, it is usually an indication of a bulb burned out in the turn signals. It can also mean that the flasher is bad and taking too much juice.
get a OBD2 (On Board Diagnostics) reader and reset the code.
No need to remove the headlight assembly. twist & remove the light bulb from the rear of the headlight assembly. Do not touch the new bulb glass with your hands. Oils from your hands will cause bulb failure.
You need to locate which bulb has to be replaced. After that open the trunk, and find special access panels behind each stop light. Open that panel. Turn the bulb holder counter clock wise. Replace the bulb reinstall everything.
they r 4 and 99.....
If you want to change just the bulb, remove the small plastic on top of the light from the engine compartment, and turn the light even with the wire harness attached, the bulb will come out.
Don't know if this works in a 99' but I have a 97'. You have reset the "oil life remaining" readout and this will reset "change oil" indicator. Scroll thru your various readouts (rpm's, water temp, battery volts, etc.) till you see it and then just press reset. Hope this works for you.
Epic Failure.