Jack the car up and place on jack stand to ensure it is stable. Remove the road wheel. Compress the caliper so that reinstalling the new brake pads will fit correctly against the rotor. Remove the brake caliper by removing the two bolts that hold it in place. Lift the caliper out by the downside first. The upside of the caliper rests underneath a lip and must be pivoted out. The brake pads are removed by prying them out with a screw driver. Install new pads and reinstall caliper following the directions in reverse.
DOT3 or DOT4
It is on a bracket just above the brake pedal.
No, it is a brake light.
The battery on a 300M is in front of the passenger side tire, inside the fender.
It is in front of the radiator.It is in front of the radiator.
It is a sealed bearing and can not be repacked.
no its not Yes is is front wheel drive with an autostick tranny
Oil change is due.
The Chrysler 300M was produced from 1999-2004. Leather trim was a standard feature, as well as heated front seats and memory controls for the driver.
You will need to call a locksmith unless you want to brake a window.
Front driver side of the engine.
It is on the lower front passenger side of the engine.