How do you bleed brakes on fiat grande punto?

Answer 1

This is a job for at least an apprehntist grade mecahanic. Start with the wheel cylinder furtherest away from the master cylinder, the right rear. With the brake master cylinder full of fuel have a second person pump the brake pedal a few times until a little pressure is felt at the foot pedal. At this point the pedal should be held to the floor while the bleed niple on the cylinder released. This process should be repeated until the fuel comes clear of air. Move on to the left rear cylinder and repeat the process then on to the front right and fiinish at the front right.

Be mindful that if the vechicle is a left hand drive the bleed process should be left rear then right rear on to right front then left front. The rule is always start with the cylinder furtherest away from the master cylinder and finish at the cylinder closest.