Have someone pump the brakes a few times then hold the pedal to the floor.
losen the bleed screw counterclockwise until air or fluid comes out. Repeat until all that comes out of the screw is fluid.
Repeat this on every brake cylinder or caliper.
note:
you must tighten the screw back everytime the fluid stops.
Dana 216 FBI (Dana 44)
The 1500 has a Dana 44 The 2500 and 3500 has a Dana 60
Dana 44Dana 44
44-54 psi at idle.
In the exhaust, on either side of the catalytic converters.
Dana 216FBI (Dana 44)
the rear is called a 9 1/4 the front, if 4wd, is a Dana 44
Front Dana 44, rear should be Chrysler 9 1/4
The front is a Dana 44The rear is a Chrysler 9.25The front is a Dana 44The rear is a Chrysler 9.25
Dorritos and Dodge
26 X 44 = 25 X 44 + 44 = 25 X 4 X 11 + 44 = 100 X 11 + 44 = 1144.
44