answersLogoWhite

0


Best Answer

The air/fuel ratio is controlled by a set of instructions within the ECU(electronic control unit) or ECM. It can only be adjusted electronically with computer equipment that intercepts signals from the various sensors and basically fools the engine computer into allowing more or less gas to be injected. It is possible with those models but is not easy. JSM

User Avatar

Wiki User

βˆ™ 12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you adjust air fuel ratio on 94 toyoto pickup 22re?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the torque specs for head bolts on 93 toyota pickup 22re?

Torque the head bolt on a 1993 Toyoto 22RE three times at 58 foot pounds of torque. The 22RE head bolts are not torque-to-yield (stretch), and are re-usable. Torque is 55-63 foot pounds. Thoroughly clean the bolts on a wire wheel and inspect for pitting, especially in the threads and replace as necessary. It is also recommended to re-torque them after about 1,000 miles. ChaCha!


What cars have a 22re engine?

The 22RE powered the 1985 to 1995 Hilux, the 1985 to 1995 standard pickup, and the 1985 to 1995 4Runner.


What is the oil capacity of a 1994 Toyota 4wd 22re pickup?

4.5 quarts.


How big is the gas tank on a 1988 Toyota pickup with a 22re engine?

17.2 gallons


What are the valve adjustment for a 1995 Toyota 22RE Pickup?

8 intake 12 exhaust ????


Motor oil capacity of a 22re Toyota pickup?

Five Quarts with filter change!


What are the Engine options for 1989 Toyota SR5 pickup?

the 89 toys had the 22r 22re and 3.0 v6


How do you adjust the idle on a 22re Toyota engine?

there is an Allen screw and a nut on the throttle cable you loosen the nut and the screw and adjust it to make it idle up or down.


Where is the fuel pump located on a 1986 Toyota Pickup 2wd long bed with a 22re engine?

Inside the gas tank


Will a 22R 1991 Toyota engine interchange with a 1984 Toyota pickup. explain how do i put a 22re into 1984 what do i need to do?

yes


Does anyone know part number for pigtail wire from knock sensor to main harness on 91 Toyota pickup 22re?

Connector 90980-11166 Wire that connects to connector then splices into wire that continues to ecu- 82998-12440 This is for my 93 22re 4x4 M/T Should be the same for your 91 22re good luck


What is the best octane level fuel 1992 Toyota pickup?

What octane of gas should I run in my 1992 Toyota pick up 22re