yes,you can.here is the 18 steps(pictures) on how to install a car dvd player in a Honda CRV.please visit: http://www.oemcargps.com/blog/honda-crv-radio-dvd-gps-navigation-installation-guide-mounting-instructions
I have a 1998 Honda CRV. Under the Hood of the Car is a Fuse-Box. (Different Fuse-Box than Inside the Car) This Fuse-Box has a Lid. Under this Lid is the Radio Code. Therefore, lift the Lid off Completely and the Code is underside of this Lid. Good Luck! You Got Lucky... Most radio stickers are installed by the PDI Tech. and are not put in the same place. If you can't find your code or code card your will need to remove the radio write down the serial number and take it to your dealer to get the unlock code. Mine was inside the lid of the interior fuse box. I got a tip from a dealer service person that if you turn on the ignition, then hold down the 1 and 6 buttons, then turn on the power to the radio, you may get the passcode displayed. This didn't work for me and I tried disconnecting the battery to clear an error msg. on the radio. Maybe you have to hold down 1 and 6, THEN turn on the ignition and THEN turn on power to radio. I have a 2000 CRV. The code for my Honda CRV was in the glove box (a sticker inside)
whats number do i put in to unlock radio is it security code or radio code to unlock radio?
If you have already tried to enter a code many times, and it doesn't work, do the following: 1. Disconnect the battery, 2. Connect the battery, 3. Put Radio ON 4. Enter the radio code of 4 digits, 5. That's all. If you don't have the radio code of your Honda Odyssey, have on hand its VIN, and ask your former salesperson or your former dealer.
Because they are completely different cars. You're comparing apples to oranges.
What rectangular panel are you referring to??
radio says safe but cant put the code in
How do i put in the anti thief code in Honda 2006 accord?
First you will need to get the radio code......i went to a Honda dealership to get mine. turn you radio on and enter the code with your numbered presets. The code will only have the numbers 1-6, it's pretty simple. Keep that code on hand cause you'll have to enter it anytime your battery may go dead.
In order to clear the radio code "ERR-3" in a Honda Accord, you simply open the hood and remove the radio fuse (there are two of them so remove the one closest to the car window) for about 10-15 seconds, put it back in and close the box, crank up the car and enter the vehicles radio code(this is usually located on a white card when you first purchase the vehicle or possibly in your glove compartment in the manual), make sure you enter the code correctly, and then the error will be removed and you can start playing music in your car! If you do not have the code then go to the Honda Owners website and register your Accord. After you register it you can get the code for free.
The Mitsubishi Eclipse radio code is the code that makes your radio work. You need to put this code in any time you disconnect the battery.
code should have been set by owner. Contact Honda, they probably have a master code, but they may ask you to prove ownership.