The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
45 ft/lb
what are the cylinder head and crankcase torque specs. for a 2003 Polaris 500
Max Torque 500 lb. ft. @ 1800 RPM
The Polaris sportsman 500 was available in 2 cycle and 4 cycle engines. Therefore the specifications are listed separately.
First off, a 350, is a small block. And, if you are talking about the torque output of the motor, well, that depends upon how it is built, and, with what parts. Anwhere from 150 ft., lbs., to 500. If you are talking about the bolt torque specs, it varies from 35 ft., lbs., to 85, depending on which bolts you are talking about.
My Chilton book shows : 1972 Cadillac Eldorado , 500 cubic inch , 235 horsepower at 3800 RPM and 385 ft lbs torque at 2400 RPM
1968 is when Cadillac introduced its new 472 cu inch 8 cylinder 525 ft lbs torque engine. In 1969 a larger 500 cu inch version was available. It was the only engine Cadillac offered from 1968 to 1972.
on a 2005 Honda foreman 500 hundred it is 22 ft-lb on the 8 mm bolt and 12 ft-lb on the 6 mm bolts
yes.
1995 falcon futura 4lt engine torque specs for ALUMINIUM HEAD are ; first, 19 ft lb second,30 ft lb third,plus a 90 deg turn on each bolt. follow tightening sequence. retorque after 500 klm.wait till engine cools. note, specs on gasmiser head gasket.
Depends on the bolt size. 8mm bolts are 17-18 ft lbs or 204-216 in lbs, 10mm bolts are33-35 ft lbs or 396-420 in...