0
No they are not.
From the early days of motoring, on-board installations of radios were unique to that vehicle. Some mounted vertically, others horizontally, some mounted as an accessory under the dash.
In later years, towards the 50s, the faceplate and knobs appeared to be getting somewhat generalized, that is, they were becoming more and more familiar between makes of autos. For several years, a person could put radio a into car b, or any number of combinations. Then...you have the aftermarket units...apparently there were some makes that had the dimensions on the knobs a bit different, as they came with moveable shafts to fit different factory plates.
Later still, radios were designed by different makes again that made them unique, and not interchangeable. They now make kits to stick whatever radio you want into whatever vehiicle, with wiring harnesses that will mate said radio to the vehicle of your choice.
it's all confusing...give me a simple AM radio ANY day, I have an FM adapter that has an input for XM/Sirius, mp3, whatever I wanna listen to.
Add your answer:
Earn +20 pts
What dimensions do you need to know for replacing the original car stereo and speakers in a 1991 Nissan Pintara Ti Hatchback E.g. dimensions of new CD player speaker sizes.?
The make and model will tell any car stereo salesperson what specific stereo speakers will fit in that car. All stereos are manufactured to a specific dimension that ensures that they will fit in every manufactured car since the 1980's.
If you have a after market car stereo in your car do you have to get new wiring to put a different after market stereo in?
That depends on the amount of pins the old and new stereo have - the "pins" are where you plug your wiring into in the back of the stereo and not all stereos have the same number of pins. (But wiring adapters with the suitable number of pins can be bought)
Where can i get a code to unlock my car stereo - ford puma?
Get all car stereo codes here... www.carstereocodes.weebly.com
Can I replace the car speakers in my car, but keep the same stereo system in place?
Yes, all you have to do in this circumstance is reconnect the speaker cables to the speakers.
How do you change a car stereo on a 1993 Mercury Tracer?
I do not know, but I am having the same problems with the removal of my 1994 tracer's stereo
Saving Money on Your Next Car Stereo?
A car stereo is a perfect example of how you're spending your money on a name and not a product when you buy brand name. After all, the components the comprise brand name car stereos are often sourced from the same exact companies that generic manufacturers source their parts from. What this means is that by buying a brand name car stereo, you're paying extra for nothing more than a name and not a better stereo.
How do you remove a car stereo?
You can easily remove your old car stereo without taking help of a car stereo expert. However, you need to follow some steps and need some tools to remove your old car stereo. You can save your money by following the steps for removing your car stereo otherwise you have to pay more money to the professional car stereo installer.Here are some steps to remove the car stereo safely.First of all, Read the user manual of the car where you can find some tips to remove the car stereo. You may find a diagram of stereo wiring, so it would be more help to you.To remove your car stereo safely, please disconnect the battery to avoid electrical short during working with wires of car stereo.To remove your car stereo from the dashboard use screwdrivers to remove the screw, which is holding car stereo. Furthermore, check that your car stereo connected with dashboard using spring or clips and others.Remove dash panels and take out the bolts and screw which hold car stereo. Now pull out your car stereo.Now you can see there are some wires, which are connected on the back of the car stereo. A wiring of car stereo is protected with clip. You should pull out the wire straight out.For more information about remove old car stereo and want to new car stereo installation, please feel free to visit this blog Houstoncarstereo.com/blog/
How do remove a car stereo?
You can easily remove your old car stereo without taking help of a car stereo expert. However, you need to follow some steps and need some tools to remove your old car stereo. You can save your money by following the steps for removing your car stereo otherwise you have to pay more money to the professional car stereo installer.Here are some steps to remove the car stereo safely.First of all, Read the user manual of the car where you can find some tips to remove the car stereo. You may find a diagram of stereo wiring, so it would be more help to you.To remove your car stereo safely, please disconnect the battery to avoid electrical short during working with wires of car stereo.To remove your car stereo from the dashboard use screwdrivers to remove the screw, which is holding car stereo. Furthermore, check that your car stereo connected with dashboard using spring or clips and others.Remove dash panels and take out the bolts and screw which hold car stereo. Now pull out your car stereo.Now you can see there are some wires, which are connected on the back of the car stereo. A wiring of car stereo is protected with clip. You should pull out the wire straight out.For more information about remove old car stereo and want to new car stereo installation, please feel free to visit this blog Houstoncarstereo.com/blog/
When was In Car Stereo created?
In Car Stereo was created in 1983.
What is the difference between a car radio and a car stereo?
Nothing. Just two ways to call the same thing.
Where can you find the wiring diagram for a 1991 Mercury Cougar stock radio?
if you are trying to install the factory stereo to it...it should be the same plug...if you are trying to install the stereo for a cougar on a different car you need to buy the plug for that stereo and then a harness for the other car...
Do car stereos work on any car?
Yes, IF the operating voltage of the stereo is the same as the battery output voltage of the vehicle.
