The Ford 302 engine will not bolt to the 300 six-cylinder bell housing. A new bell housing or a Bell housing modification kit will need to be used.
No it won't the 360 has an almost perfectly round bell housing ..and the 300 6 is the small block bell housing which has the top two bolt holes higher so it will not line up
no different bell housing
The C4 will bolt up to the 302 with the correct bell housing.
the bell housing bolt pattern is the same but the flywheel on 460 is thicker and makes they pressure plate hit bellhousing from 351m/400 there for it will not work you have to have a bellhousing from a 429 or 460
if you change the bell housing
it is the part of the transmission that bolt to the engine and houses the torque converter / clutch
the bolt patterens are different if you change the bellhousing it will work
no the bell housing is different as is the spline for the clutch
15mm and 13mm for starter bolts
Depends.if the bell ( where it covers the flywheel behind the motor) is a bog block.or small block bell housing. Like a small bell housing will bolt to a 302 and big bell.housing will bolt to.a 460
No it is not. The diesel bell housing is much larger.