answersLogoWhite

0


Best Answer

It sounds like it could be faulty wiring or loose wiring. In the cold, metal, thus wires, contract. I have dealt with this in my car and I had to test each wire to find out where the problem was. Chances are that the wires are barely touching, or it is exposed and touching something else and that is what is causing the blinkers not to work.

User Avatar

Wiki User

20y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why might the dash lights not work in cold weather?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why do Toyota dash lights stay on after engine starts?

A bad relay switch could be the culprit if dash lights remain on after engine starts in a Toyota. Cold weather can also cause these lights to stay on after the engine starts.


The parking lights and dash lights are not working fuse bows out?

If parking lights and dash lights are not working and fuse blows out, there might be a problem with battery corrosion. Check the components specific to the circuits of the affected lights. It might be loose.


Why might the parking lights and dash lights not work?

Headlight switch (IT) controls the dash lights ALSO.Some have a fuseable link..ASSUMEING all the bulbs are g00d..


The brake lights tail lights and dash lights quit working?

check your ground wires...they might be loose or detached.


What would make all the lights on your dash flicker?

Might be a weak battery


What might be wrong with a Mitsubishi Galant if the lights only turn on when the driver hits the breaks?

Are you talking about ALL the lights, or just the dash lights? If it is just the dash lights, you might have a bad ground for the dash electronics, or bad connection at the Dash Dimmer control. But if you are talking about headlights, too, check the gound wires on the battery... perhaps wiggle them around until the lights flash. The brake light switch should not do this. It only controls the back lights. if its only the dash lights lighting up when you hit the brake, check the brake bulbs and make sure that they are the correct bulbs. (dual filament) and that the base of the bulbs contacts arent touching


Why does 95 mercury sable have no dash lights and no tail lights?

Changing dash panel lights 1995 Mercury sable how do I do it


When Headlights come on dash and taillights do not on my 93 chev truck?

Check your fuse for tail lights. I think the dash and tail lights are on the same fuse so you know when your tail lights don't work. Might have a short or an open in that circuit.


The dash lights are out and the fuses are all good so what could be wrong on a 1997 Ford Expedition?

You might want to check or replace your dash dimmer light switch. I found this to cause either no dash lights or intermittent lights. Check the fuse box under the hood. The fuse you need is under the hood.


How do you replace dash lights on Ford f 150?

where are the dash bolts located to replace burnt dash lights


What would cause the dash and tail lights go out on a 93 Chevy fullsize blazer?

might be a fuse


Why do your running lights work but not your brake lights on your 91 Chevy?

on the brake pedal under the dash is a brake light switch. that when you depress the brake it turns your lights on. you might wanna check that