You need to have the engine and abs checked for codes.
An electrical failure in the ABS system.An electrical failure in the ABS system.
After repairing the failure that caused the code, the lights will reset themselves.
either a bad sensor somewhere, or a connection is disconnected
When the ABS and Brake light come on, it means there is a problem in the ABS and Brake system. If the issue is resolved and the light stays on, a person can use a scanner and clear this light.
2996 dodge Dakota ABS lightIf you notice the speedometer is also not accurate the problem is most likely the rear ABS speed sensor. This is located on the top of the rear differential housing of the truck. It is simple to change, and caost about $45.
more than likely a scan tool will have to be used, to clear the code that was set , when the ABS light came on.
The ABS (antilock brake system) light is on because there is a problem with the ABS system. Until that problem is fixed, the light will remain on and the ABS system will not be functioning. You will still have regular brakes but without the ABS function. Take it to a qualified mechanic for repair.
check brake light switch under pedal . It might have came loose from bracket
The abs and brake lights stay on when there is a blown fuse or when the abs computer detects a malfunction and sets a code.
You most likely do have rear wheel ABS. The system has deteced a malfunction and set a code.
The ABS computer has detected an electrical or mechanical malfunction. You need to have it checked for codes.