turn the key to the on position engine not running step on gas pedal to the floor three times and wait for light to flash and go out and its reset
If the check engine light is blinking that means an engine cylinder misfire has been detected
Disconnect the battery for approximately two minutes.
disconnect the battery for 30 seconds
When the engine is not firing on all cyclinders or has bad spark or lean or rich fuel it will cause the light to flash. Mine did this and I had a loss of power. I replaced the spark plugs and wires. It stopped the light and I got my power back as well as got more mpg.
You need to hook the computer up to a scan tool to read the codes. That will tell you why the light is on.
A flashing check engine light is an indication of a misfire.
Turn the key to on position, push the gas pedal to the floor three times, you should see the indicator screen flash, turn the key to off. You should be reset.
Have vehicle scanned to determine the problem and have codes cleared
unhook the positive on the battery for 5 min. This should reset your check engine light if it doesnt then you still have issues.
If your Chevy Venture ABS light is on, that means that there is some type of problem with your anti-lock brakes. For the light to turn off, you will need to see a mechanic and have the problem looked at.
it can be of all stupid things a improperly fasstened gas tank cap