0
Be more informative on "over heats". Is it being driven along time before it over heats? Is the guage showing hot but not boiling out the radiator, is there steam coming from under the hood, is there a sign of leaking under the passenger side dash or under the firewall on the ground, have you had the thermostate replaced, is the water pump leaking?
Add your answer:
Earn +20 pts
What causes Oil leaks 92 Plymouth acclaim?
are you sure its not rusted? cause me 92 Plymouth acclaim's oil pan rusted, and i had to get a new one. it only cost like 3-$400.
1992 Plymouth Acclaim what Refrigerant is to be used?
My 1991 Plymouth Acclaim manual says mine is R12, but I can't say for the '92 It was built with R12, should be retrofitted to R134a.
What is the gross vehicle weight of a 92 Plymouth acclaim?
2783 lbs for the base model
Where is the fuel pump reset switch on a 92 Plymouth acclaim?
Chrysler/Plymouth/Dodge vehicles do not use inertia/reset switches.
Where is the starter on a 92' Plymouth acclaim?
On the 2.5L, it is under the intake/exhaust on the back of the engine. On the 3.0L it is below the exhaust manifold on the front.
Where can you find a belt diagram for a 92 Plymouth acclaim?
Just go to your local Autozone. They can print you one out at the parts counter while you wait.
Do it yourself Window motor repair for 92 plymoth acclaim?
how to fix a window motor for a 92 plymoth acclaim
Where is the 92 Plymouth Acclaim speed sensor?
It is located on the backside of the engine/transmssion assembly against the firewall. It is screwed into the diff houing and is easier to get to from beneath the car.
Where is the fuel filter located on a 92 Plymouth Acclaim?
Filter is located in the fuel line under the right rear(passenger side)of the vehicle, adjacent to the fuel tank.
What to do to 92 Plymouth acclaim when it bucks hesitates and sometimes stalls while driving?
trade it in, or sew whoever sold it to you as a lemon, unless you bought new or as is.ORget it inspected and try to find out whats wrong with it
How do you tighten the serpentine belt on a '92 Plymouth Acclaim?
Theres a pulley tensionor, loosen the bolts to it, pull it tight and retighten bolts, but dont over tighten the belt... there should be alittle play but not much, because if its to tight, it can break, to lose and it will come off, once you tighten tensionor, it should have about a quarter of an inch of play.
What is the coolant for 92 Plymouth sundance?
Zerex antifreeze coolant
