answersLogoWhite

0


Best Answer

1) because spark plugs work by getting a huge blast of electricity delivered to them through the wire

2) because the insulation of the wire isn't perfect, so part of that electricity can jump to you.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why do I get Shocked by a spark plug wire?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Your 17 hp Briggs and stratten lawn mower won't start it has gas don't know if has spark?

You can check for spark by removing the plug wire from the spark plug and holding it about 1/4 inch from ground. Have some one crank the engine or pull the starter rope and look for a spark to jump from the spark plug wire to ground. DO NOT hold the wire with your bare hands since you will get shocked. If you have spark there, remove the spark plug and insert it into the end of the spark plug wire and do the same procedure. If there is no spark, the plug is bad. If you have spark, the problem lies elsewhwere.


What does it mean if your car jumps after getting a tuneup?

Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?


How do you remove a spark plug when the wire came out the spark plug?

If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.


What would cause one spark plug wire to arc to the engine at the spark plug boot?

bad spark plug wire.


What is a spark plug boot?

The rubber end on the spark plug wire.


Can a vehicle start with a broken spark plug wire?

no it can not start with a broken spark plug wire unless you fix it


How do you change wire?

Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.


How do you check an engine for spark?

Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.


Where can i find wiring diagram for 92 Honda accord?

spark plug wire setup spark plug wire setup


Why a spark plug is not working Nissan altima 1994?

Defective spark plug? Defective plug wire?


How do you change the spark plugs on a 2.4 liter 98 stratus?

Used proper sized spark plug socket with long extention and ratchet. Disconnect spark plug wire by using wire puller or tugging at boot of wire. Place spark plug socket over spark plug securely and removed.


How do you remove the spark plugs in a 88 Chevy Celebrity v6?

Remove the spark plug wire. Using a 5/8" spark plug socket with appropriate extension and driver unscrew the spark plug and remove it. The spark plug gap should be set to .045". Replace spark plug and reattach wire.