answersLogoWhite

0


Best Answer
Nonfunctional Brake Lights

One possible cause of this issue is that the brake light switch is not adjusted properly, or the switch could be defective.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why are my brake lights out but my headlights and blinker work?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why do the blinker lights and brake lights work but tail lights don't work on 1987 ford ranger?

The tail lights are on a separate wiring than the blinker/brake lights. Look for a blown fuse or a broken/loose wire.


Why does your parking lights and brake lights work and not your headlights and you replaced the switch and still no headlights?

Check the fuse for the headlights. It is probably open.


What should I do when my 2000 Cirrus brake lights work when the headlights are off?

ummm... your brake lights should ALWAYS work whether your headlights are on or not, that's how people behind you know you are stopping.


Why do the brake lights not work on my 2002 Isuzu rodeo when my headlights are on but work when they're not on?

Check the bulbs they are double filamented with smaller being for brake lights


Brake lights don't work when the brake is pushed. Work with headlights on only.?

The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.


How do you fix brake lights on both sides When my blinker and everything else work?

Check the switch


What causes your tail lights and parking lights not to work but turn signals headlights and brake lights work?

Fuse, wiring, bulbs


What is the cause for tail lights.parking lights and dash lights not to work when you have headlights and brake lights?

Most likely a fuse.


What causes the brake lights to work when the headlights are off but when you turn the headlights and running lights on the brake lights go off on a 1992 Plymouth Sundance?

Often this type of behavior is caused by a bad ground for the lighting circuit. Check the ground circuit for the brake lights.


Brake lights out on 1997 Suburban fuse is good Tail lights turn signals and hazard lights work I checked the fuse its good?

check the brakelight switch. it is located under the dash where the brake pedal rests. Hey its ritchie. If you can click your blinker down and then they work its you blinker switch,but this is my monte.


Why don't the brake lights and blinker lights work on a 97 Chevrolet Lumina?

First check the fuse, or you may have a burnt out bulb


Why do my brake brake lights only work when i press the wires on turn signal arm 1998 lumina?

the blinker switch shorted out the brake lights... really really common problem, need to replace the switch