under the emissions temperature sensor on the right side under the radiator hose connection to the block if you are standing in front of truck looking at motor, the coolant is the lower one of the two and has a single plug on it not a double. This is very confusing because if you search the web for this you will get a million 2 pronged sensors that swear they are for this truck but are not, I had the same issue with the one above it as well. My truck emissions temp sensors plug barbs are in a T shape opposing each other not the parallel plugs the interwebs and most all parts stores SAY it is. Good luck
Its Located Rite Behind The Engine. STUPID!!!!
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
when do you change the timming chain on a mazda 2001 b2600
The front speakers in a 1989 Mazda B2600 truck measure 5 inches by 7 inches. These speakers are located in the front doors.
COOLANT sensor on mazda 6 where is it
The coolant temperature sensor should be located near the upper coolant hose where it enters the engine block, just a few inches nearer to the windshield. It is usually a gold color.
There is only 1 and it is on the driver's side below the exhaust manifold facing rearward. The connector is located next to the thermostat housing near the front of the engine.
Mounted on top and inside the fuel tank.
no sensor only a thermostat
The sensor is threaded into the head to the left of the thermostat housing and has a single wire connector on it. Thanks Malcolm
B2600 has a carburetor system and B2600i has an injection system.
There is a coolant temperature sensor and a temperature gauge sensor. the coolant sensor is located on driver side of the cylinder head. screws right into it, and the temperature gauge sensor is on the front side of the cylinder head right under the distributor. hope this helps