The slave cylinder for a hydraulic clutch is located inside the manual transmission bellhousing
It is located on the clutch slave cylinder. The slave cylinder is mounted on top of the transmission. Have someone push on the clutch cable and you will see movement on the cylinder.
The slave cylinder for your hydraulic clutch is located inside the transmission bell housing
the slave clutch cylinder is located behind the engine directly above the flywheel on the Transmission
After you have located the clutch slave cylinder, have someone depress the clutch pedal. You should see the piston of the slave cylinder extend somewhat. If it does not, either the slave cylinder is bad, or the master cylinder, or, there is not enough brake fluid in the system for it to operate properly. Check the level in the master cylinder. If the slave cylinder is leaking profusely, it is probably bad.
The slave cylinder for a hydraulic clutch is located inside the manual transmission bellhousing
Master Cylinder for brake and clutch are located next to the ABS unit on the firewall of the driver side in the engine bay. Slave cylinder for clutch is located on the bottom of the transmission.
Mine is a cable clutch so there is no slave cylinder. But if yours is a hydraulic clutch then it should be located on the firewall on the driver side close to the master cylinder.
The Clutch slave cylinder is located on the passenger side of the bellhousing.I recommend to replace the Clutch Master cylinder also;if either one is replaced , the other will fail in no time.
the slave clutch cylinder is located inside the housing of the clutch/transmission. Unless you really know what you are doing a trained tech probably should replace this part.
The slave cylinder is not on the firewall, it is at the transmission. The master cylinder is on the firewall.
Follow the hydraulic hose from the clutch master cylinder. The other end attaches to the slave cylinder.