Follow the 6 wires from the coil. 3 on each side. The plugs are buried at least 10" from the outside of the engine (due to overhead cams). You should have a very long extension for your socket or 2 extensions. Consider using a socket with a locking device so it doesn't get stuck on the plug. On the passenger side you will have to take off the hose from your air intake in order to access the plugs on this side. On the passenger side you sill have to twist and pull off boots which have a long plastic tube running down to the plugs. This is part of the coil-over ignition system.
How do you change spark plugs in a 6 cly Toyota Camry?
Sorry, but you are badly mistaken. There are six spark plugs on the V6 Toyota Tacoma.
6
they are attached to the ends of the spark plug wires
4 if it is a 4 cylinder and 6 if it is a V6.
follow the spark plug wire to the engine head and there they are
The spark plug gap for a 1994 v6 Toyota Pickup should be set at .032 inches. However spark plugs now come with the gap preset.
There are 6 spark plugs in a V6 engine.
The 2006 Toyota Tacoma V-6 engine spark plugs can be removed with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs.
The t100 does not have a distributor. Instead it uses 3 ignition coils ( 2 spark plugs per coil) and the computer fires the primary of the correct coil at the appropriate time. This change was primarily done to improve the ability of the computer to optimize the timing for all the variables (especially smog and performance).
I believe its 150HP.
I would just snug them up securely. ( common sense) Torque values are used on engine parts to avoid over tightening.