0
Add your answer:
Earn +20 pts
When starting up the generator you should not crank the engine longer than?
15 Sec
Is there such thing as a sump pump connected to a generator?
Yes, a sump pump can be connected to a generator to make it operate. Keep in mind that the starting current of the pump motor could be 300% of the running current and the sizing of the generator should take this into account. If you are looking for the sump pump using a mechanical connection it will connect to the engine and not to the generator.
Why should the generator field rheostat be kept to its maximum at starting?
Keeping the generator field rheostat at its maximum at starting helps to establish a strong magnetic field in the generator, which is essential for generating sufficient voltage to initiate the generation process. This ensures a smooth and stable startup of the generator.
How long should you let the ventilation system run before starting the engine on a boat?
You should let the ventilation system run about four minutes before starting the engine on a boat.
Is Your Standby Generator Big Enough?
When selecting a standby generator, you should not only consider the wattage requirements of any equipment connected to the system, but you should also factor in the starting wattage of any electric motors. The typical electric motor draws three to five times the current when starting than it does when running, so it's important to have a big enough generator to avoid burning out any motors.
Does any manufacturer produce a backup generator that can run on gasoline or ethanol or methanol?
Yes, generators are manufactured that can run on these products. The overlying factor is how large a KVA generator is needed for backup. If a large size generator is needed, the gasoline engine driving the generator may not have enough horsepower to do the job when compared to a diesel engine. Larger gasoline engines consume much more fuel per HP than do diesel engines, if cost is a factor in the equation as to what engine should be used to drive the generator.
What should you do starting an inboard gasoline engine?
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
What size gas engine to run 35 kw generator?
At 746 watts per horsepower (electric) a 35 kw generator would require about 470 horsepower. Round that up, and allowing for control loop margin and mechanical losses, I would guess that a 35 kw generator should need a 500 or 600 horsepower engine.
What should you before starting an inboard gasoline engine?
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
How do you full field a ford tractor generator?
while the engine is running , put your + lead from your voltmeter on the armature lug( the big lead). take off your field wire from the generator (don't add power to the lead from the regulator or you will fry the regulator) add a power source to the field lug of the generator. the generator should start climbing, if you get 14.5 volts , the generator is good
What should you do before starting an inboard gasoline engine?
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
How many minutes should a blower be operated before starting the engine?
It depends on the size of vessel and type of engine.
