0
I use Gates Poer Rated 6839 for reverse and Gates Power Rated 6836 for forward on my Snowbird 7010-1. They are the green material, cotton I think, cost is about 20 or so each. They hold up very well, I replace every five years. I was using the belts(automotive) from NAPA, but they would only last if luckly 2 seasons and I do not use the machine commercially. The NAPA belts aren't designed to carry heavy loads. Don't ask me why I waited so long to stop by my local shop, I could have saved myself alot of hardach! I almost threw out the machine because of it.
Add your answer:
Earn +20 pts
What size belts does a snowbird 262 snowblower take?
forward drive belt is a Gates # 6838 38x1/2 reverse belt is a Gates # 45x1/2
What size beltsdoes a Snowbird 261 snowblower take?
fordward is 1/2 by 38 inch reverse is 1/2 by 44inch
What size belt does the dynamark 826 snowblower take?
go to sears.com type in model number and serial number, most of the time they will show you a parts break down/ note belts are like every thing else you get what you pay for. a good belt will cost about $20
What size belt does a dynamark 523 snowblower take?
Belt , Traction drive P/N 53790 and Bel t, Auger drive P/N 3526.
How do you replace the two belts on a 1999 pick up 5 something v8?
You don't list the Make, Model, which belts, or engine size, and expect an answer. The only answer I can provide with the information you provided, is, take it to a professional for this repair.
How many quarts of oil does a 5 HP snowblower take?
My John Deere snowblower with a 5 horsepower Tecumseh engine takes ( 20 ounces ) which would be .625 of a U.S. quart
What type of oil does the craftsman 5hp snowblower take?
SAE 10w30 synthetic oil.
Where can you get a Spirit snow blower belt?
Oscar Wilson.com bought all the parts for the Murray snowblower. Contact them and give them your model number and serial number of your snowblower and if they have any left they will take care of you.
How do you replace the powering steering pump on a 1995 Chevy G20 Chevy van?
Take off the belts then the hoses then the belts holding it on.
How do you remove carburetor cub cadet tractor?
How to take off the carburetor off a cub cadet snowblower 305cc 30 in cut. Take the out side cover off of the carburetor
A auger bearing for a 1977 sears 5 HP snowblower?
pull or press the bearing out and take to a local bearing/machine shop to measure
How do you take off the alternator belt on a 1995 trooper the alternator is off and i cant find a way to get the belt pass the other belts?
you have to remove all belts
