0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What size are the bolts for changing a thermostat on a 96 Chevy blazer?
They are Metric bolts, 12 or 13 millimeter I think.
What is the thermostat location for a 1997 Northstar 4.6?
your thermostat is located on the engine where your lower rad hose goes in your engine two bolts hold the housing on . no gasket sealer is needed
97 Nissan 4x4 pickup 4-cylinder 2.4 size engine where is the thermostat located to replace it?
follow your top radiator belt,its inside the thermostat cover.2 bolts hold it on.
How do you change the thermostat on a Pontiac Vibe?
Thermostat is located just below the water pump. Follow the lower radiator hose to the pump. There will be two bolts; likely size 8 bolts, and another nut just below attached to the hose to pull away from pump. Hope this helps!Thermostat is located just below the water pump. Follow the lower radiator hose to the pump. There will be two bolts; likely size 8 bolts, and another nut just below attached to the hose to pull away from pump. Hope this helps!
How many bolts on thermostat housing?
In most cases the thermostat housing has four retaining bolts. The exact number of retaining bolts is dependent upon the year, make, and model of the engine.
How do you change the thermostat on a 1995 Jeep Cherokee?
Changing a thermostat on a 1995 Jeep Cherokee is very easy to do. The thermostat has two bolts holding it in place. Take the bolts off and remove the thermostat from the casing and replace with a new one.
What are the Torque specs for 1995 Toyota thermostat housing?
The 1995 Toyota Tacoma thermostat housing torque specification is 40 pounds. The amount of torque on the thermostat housing bolts is not that important. You basically do not want to break the thermostat housing bolts.
What size nut does the thermostat have on a 94 honda accord?
It doesn't have any nuts. It has 2 10mm bolts and an air bleed screw on top of the housing.
How do you change the thermostat on a 1994 Chevrolet Cavalier?
follow the top radiator hose to engine . remove three bolts from housing change thermostat and gasket ,put bolts back in follow the top radiator hose to engine . remove three bolts from housing change thermostat and gasket ,put bolts back in
Changing a thermostat in a 1999 Hyundai accent?
Changing a thermostat in a 1999 Hyundai Accent is very easy. To locate the thermostat, follow the upper radiator hose. The thermostat can be removed by taking off the housing retaining bolts. After the bolts are removed, take the thermostat out and replace with a new one.
Where is thermostat located ea falcon?
Where the upper radiator hose connects to the engine you will find the thermostat housing. Under that housing is the thermostat. Usually has 2 bolts holding it on.Where the upper radiator hose connects to the engine you will find the thermostat housing. Under that housing is the thermostat. Usually has 2 bolts holding it on.
How do you replace a thermostat on a 1988 Pontiac Bonneville?
The thermostat is on the top of the motor where the top radiator hose attaches to it. The housing for it should be held on with two bolts. Remove the bolts and lift up the cover. There's the thermostat.
