0
Add your answer:
Earn +20 pts
Where is the flasher relay on 1994 Mazda B4000?
under the steering wheel, in the fuse panel. it is round
Where is the cam timing sensor on a Mazda B4000?
Checking on the location of the one for a 1998 4.0L: Under hood, center, upper engine area, mounted behind rear of intake manifold, in the engine block .
Where do you find the relay for an electric window in a 1994 Mazda B4000?
my Mazda 1996 b4000 power window relay is located in an auxiliary relay box under the instrument panel next to the steering wheel shaft. The size of the box is about 3x5x2 and it has 8 relays in it.
Where is the speed sensor for a 2000 Mazda b4000?
Iti's mounted to the transmission. You will need to go under the car and look for it. Hope this will help.
Where is the neutral safety switch to 1999 Mazda B4000 automatic pickup truck?
switch is either on side of transmission, or under the dash
Where is the oxygen sensor 1994 Mazda b4000?
Under hood, driver side, rear engine area, above exhaust pipe flange, mounted in exhaust manifold.
Where is the emergency shut-off reset button on a1994 Mazda B4000?
in my 2000 b3000 it is under the passenger glove box next to the fuel pressure release valve.
Where is the oil filter location in a 2005 Mazda 6?
The oil filter on a 2005 Mazda 6, v6 is on the front side of the engine block about 8 inches up from the bottom of the engine block. You have to go in from under the car. Don't know about 4 cylinder.
Does anyone have a vacuum diagram for a 1997 Mazda b4000?
If the diagram decal is not under the hood, your best bet would be to visit your local library and find a reference specific to your vehicle. I don't think reference books are available for checkout, but you can make copies of the diagrams there.
Fuel pump relay on a 1996 Mazda 626?
UNDER HOOD, DRIVER SIDE, FRONT SIDE OF STRUT TOWER, MOUNTED ON REAR OF RELAY BLOCK
How do you change main fuse in 2006 Mazda 6?
The fuse block under the hood needs to be raised. There are four tabs around the perimeter of the block. There are 2 small bolts that hold the fuse in place. Remove the 10mm bolts then simply pull out the fuse and replace it, reinstall the bolts and place the fuse block back in place. There are sliding guides that will align the block.
Why does your 1995 Mazda millenia smell like burnt oil under the hood?
Probably burning oil on the engine block, typically from a valve cover gasket or loose Filler cap seal.
