50W if synthetic, 80W is mineral.
50W synthetic, or 70W mineral oil.
24 ozs.
On all Eaton-Fuller transmissions, the fill plug is on the left side of the transmission. You insert the drive end of a 1/2" socket into it, and turn it counterclockwise to unthread it. That's where the transmission oil goes. Eaton-Fuller recommends you use either 50W synthetic, or 80W if you're going with mineral oil.
Took 2 quarts for mine.
It is important to know the oil capacity of a given transmission. For a C4 Transmission its oil capacity is 9 US quarts.
If the converter is drained, then about 17 quarts of fluid will be used. 75W90 is the recommended transmission oil to be used.
The Oil capacity of a 2.4 Nissan Altima transmission is 2.4 liters.
Heavier weight oil might work in warm climates but I wouldn't put it in north of Texas. Eaton specs 50 wt. synthetic in their 18 speeds.
Eaton Fuller recommends 50W synthetic. Not sure about other transmission manufacturers.
transmission oil capacity is 0.75 liters
Eaton-Fuller recommends either 50W synthetic or 80 weight mineral oil.