It states in the owners manual that fork oil level is measured with the forks collapsed, 120mm from the outer fork tube to the top of the oil. The inner push rod needs to be collapsed and bled by putting your finger on it and stroking it through the travel several times until it is full. Then you can measure the oil level accurately.
125mm from the top edge of the fork without the spring and with the fork collapsed. Also the weight of the rider can change the oil height along with the riding style.
6 oz of oil per fork
330ml per fork
400ml
what is the fork level height for a 1995 CR 125 honda
120mm from the top
400cc (per fork) should be about average. The range is about 330cc to 425cc, depending on how stiff you want the forks to feel.
250cc per fork
Sae 5w
You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are: Minimum Height: 155mm Standard Height: 139mm Maximum Height: 117mm
ex250 ninja 2008 10w fork oil, 360 ml and 108 mm air gap
5 wt.