The rotor is the disc in the disc brake system.
The years 1983 and 1984 disc brake spindles are interchangeable with a 1982 Chevy C10 pick up.
yes they did. both 71 and 72 came standard with disc brakes and they were all 5 lug. 1967-1970 were all drum brake and 6 lug
Air in the system. Bleed the brake system.
There should be two rotors if your truck is 2wd. They are located where the brake pads clamp to. Rotors are also called brake disc. It's the round disc between the brake pads.
what kind of wrench to remove brake pads
Does this Blazer have four wheel disc Brakes? NEW ANSWER: There's no reason to bleed brakes if you did not open the system.( where brake fluid came out )
disc brake components
Its got disc brakes in the front, therefor brake pads and its got drum brakes in the back, therefor brake shoes
Most front wheel drive vehicles do. -The caliper in all vehicles is fixed and the 'floating disc' is the brake rotor.
No, a disc brake repair job won't be anymore expensive than traditional brake jobs. If you have performance brakes or an ABS system, that would probably be the most expensive brake job.
It depends if 4 WD or just FWD and what year model Generally: FRONT: Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake disc minimum thickness (disc-drum system) 22 mm (0.866 inch) Brake disc minimum thickness (4-wheel disc brake system) 24 mm (0.944 inch) REAR: Brake Pad Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake Disc Brake disc minimum thickness 11.0 mm (0.433 inch)