A DC pass through will pass a DC voltage in only one direction. Bidirectional will let a DC voltage travel both directions.
A voltage DC(direct current voltage) is a uni-direction steady voltage. It is the opposite of an analog/alternative voltage which varies in polarity and direction with time.
South
In AC voltage, frequency refers to the number of complete cycles per second that the voltage alternates direction. This is because in AC voltage, the direction of current flow continuously changes over time. In DC voltage, there is no alternation of direction, so frequency is not applicable.
Under AC voltage, electrons in a conductor will continuously change direction due to the alternating nature of the voltage, leading to an oscillating current flow. Under DC voltage, electrons flow steadily in one direction through the conductor, resulting in a constant current.
The polarity of DC generator can be reversed by reversing the field current as well as direction of rotation
DC does not travel through a capacitor for long because there is a buildup of charge on the plates and when the voltage matches the supply voltage, mo more current flows. But capacitors are used to smooth a DC supply because a capacitor acts a bit like a small battery and can prevent any rapid fluctuations in the supply voltage.
To reverse the direction of current.it converts ac voltage produced at the armature to the pulsating DC voltage at brush terminals
it clips all the bottom voltage off the sine wave,to get steady dc voltage you will need to clean up the ripple to get good voltage regulation <><><> A diode does not change AC to DC, but it does allow alternating current to flow in only one direction. A diode (or often 2 or 4 diodes) with a filter can be used to rectify AC into DC.
An inverter is the apparatus that changes direct current (DC) to alternating current (AC). It does this by converting the fixed voltage and direction of DC electricity into an oscillating voltage and alternating direction of AC electricity.
There's no such thing as a 'negative voltage' in the 'polarity' sense, only in the 'direction' sense. So what exactly are you asking?
AC voltage with no DC offset will change both it's voltage level (constant change, hence AC) and polarity (ie direction) every 1/2 cycle when it crosses zero.