what is the job of a one-way clutch
Is to disengage and engage
The Ford Explorer triple function clutch switch is located on the top of the transmission. The switch should be labeled for easy identification.
The function of the clutch is to separate the drive train so that the gears can be changed without being damaged.
A clutch pressure plate is used to clamp the disc to the flywheel and transfers the power to the transmission.
Clutch will slip, chatter, smell, or otherwise not function as it should.
allows fuel to enter into the cylinder till it is held
yes just replace the fan clutch assembly
To control clutch pressure
It presses the spring loaded levers that release the presure on the clutch plate.
Bypass the clutch safety switch located under the dashboard. Note that his must entail more than simply unbolting the switch so that the cluch pedal does not actuate it. The safety switch signal is also used by the ECU to signal a clutch-disengaged condition. You will need to keep the switch with its original mechanical actuation by the pedal, but electrically separate the start safety function from the ECU function. Drew
There is no adjustment, it self adjusts. If air is present in the hydraulic system, it will not function properly.