Buy a cheap ice pick. Using a vise or good pliers, bend it at the end at a 90 degree angle or so to make a hook. It should be strong enough to get the rock out. Otherwise pull the spark plug boot off, break the ceramic plug part, remove all broken fragments of rock and ceramic, then unscrew the rest of the broken plug and install a new plug.
Pull on it, its just stuck.
remove socket with item stuck get screwdriver push threw and watch out for palm!
Disconnect the car battery cable, remove the spark plug cables, remove the spark plug boots, and remove the old spark plugs. Next, put in the new spark plugs, replace the boots and cables and reconnect the battery cables.
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.
Disconnect the battery, remove the spark plug wires and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug wires and reconnect the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Properly dispose of the old spark plugs. Next, put in the new spark plugs, reattach the spark plug boot covers and spark plug cables and reconnect the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, reattach the boot covers and spark plug cables and reconnect the battery.
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, reconnect the spark plug cables and covers, and reconnect the battery.
Disconnect the battery cables, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug cables and reconnect the battery cables.
Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.
Remove the spark plug wire. Using a 5/8" spark plug socket with appropriate extension and driver unscrew the spark plug and remove it. The spark plug gap should be set to .045". Replace spark plug and reattach wire.