first you must remove the screw on the bottom right of the radios molding. then remove that molding by prying it apart. then there are two screws one above and one below the hand grip located on the front part of the dash remove those screws. next under the steering wheel and above it there is a molding that meets in the middle insert a flat head horizontally and in an upward movement separate the two moldings. next tilt sterring down all the way. and forcefully remove the entire molding that is surrounding the cluster and extends out to that hand grip. next throw it in the back and you now have four screws to remove to complete the extraction of the cluster.
Remove instrument cluster in a 2003 olds aurora
Disconnect negative battery cableTilt the steering wheel to its lowest position and remove the instrument cluster bezelRemove the instrument cluster retaining screwsPull the instrument cluster out,unplug the electrical connectors from the backside and the shift indicator from the bottom (automatic trans models) then remove the cluster from the instrument panel
Remove the dash and remove the instrument cluster, the lights are in the back of the cluster.
* Disable the airbag system * Remove the instrument cluster bezel * Remove the retaining screws and pull the cluster forward * Unplug the electrical connectors and remove the cluster from the car
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
Remove the instrument cluster cover. Each instrument gauge is secured separately with retaining screws. Remove the retaining screws from each gauge. Remove the wiring harnesses from each gauge.
Removing the instrument cluster on a Peugeot 206 is simple. You start with removing the steering wheel and then take out the dash board and then take out the instrument cluster.
Removal and Installation Remove the instrument cluster finish panel. Remove the lower steering column cover. Remove the lower steering column cover retaining bolts. Position the parking brake release aside and remove the lower steering column cover. Remove the retaining bolts and remove the lower steering column reinforcement. Position the transmission range indicator cable out of the way. Disconnect the cable.Remove the retaining screw and position the cable aside. Remove the instrument cluster screws and position the instrument cluster aside. Disconnect the electrical connecters and remove the instrument cluster. To install, reverse the removal procedure.
You will need to remove the instrument cluster board. To do that, remove the trim piece around the instrument cluster, then carefully pull the instrument cluster out of the dashboard. Note that the instrument cluster plugs in to a socket in the dashboard, so be careful as you remove the circuit board so that you do not damage the plug. Once the instrument cluster is out, replace all bulbs. They twist to remove, and if the odometer bulb has failed, the others are getting old too. It might be best to replace them all to avoid future problems.
It is not difficult. First you have to remove the 12vot cigarette lighter plastic and then remove the radio. 4 screws for the radio. Then you have to remove the panel that goes from the radio up to the instrument cluster. This panel has 4 screws. 2 of them are on top of the instrument cluster (visible) and the other two should be visible after removal of radio.
Inside the instrument cluster. To replace them remove the cluster and take it apart.
Behind the instrument Cluster. Or remove it and replace the Cluster.