The average cost to replace CV joints is approximately $300. It is more inexpensive and less time consuming to replace both CV joints.
Bad CV joints. Replace the CV joints.
How do you replace the CV joints on a 1993 Nissan Sentra XE?"
It Runs From 50_100
It is not cost-effective to attempt to replace just the CV joints. Rebuilt CV shafts are available for as little as $60.
2,000 bucks
It does have CV joints but, it is best to just swap out the complete axle assembly than to replace only the CV joint. You will spend much time and almost as much money trying to replace the CV joint than to just purchase a reconditioned axle assembly and swap it.
On the Chrysler there are no such things as "CV joints". There are however "U joints". To remove them you would have to drop the driveshaft and have them pressed out by a machine shop.
That depends which model it is. On older models CV-joints were moulded into the driveshaft. To be replaced they had to be removed using a press and then warmed to be able to replace them. On these models it is often better to replace the whole driveshaft. On newer models CV-joints are attached with clips and can be replaced more easily.
Maybe it is one of the other cv-joints. Each half shaft has two cv-joints. Better off replacing the complete halfshaft with a rebuilt unit than to replace the one cv-joint only.
The 2000 Ram had u joints, not cv joints at the front axle.
The CV joints in 1999 Malibu can be replaced by removing the front tires and moving the brake lines out of the way. Next, you will need to remove the nuts for the CV joints by using force to remove it from its housing.