what is the fork level height for a 1995 CR 125 honda
You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are: Minimum Height: 155mm Standard Height: 139mm Maximum Height: 117mm
5o ml each leg fork.
174cc per leg
140 mm
The type of fork oil and amount you would use for a Superbyke RMR 125 is semi-synthetic 4-stroke oil with an amount of up to 2 liters. Fork oil is used to lubricate both the engine and the gear boxes.
750 ml per leg
From my under standing if your riding MOTO, with a fork oil level gauge you measure put 110 mm.
210ml per leg
According to race tech, for a 170 lb rider, use 285cc per fork.
250cc per fork
70-75ml ATF