There has to be a casing for the pump to be in. There should be something showing above ground. How is the power run to it, does that point you in a direction? Where is the water tank, where does the line coming in point to?
how long should you run a sump pump so the moter doesnt burn out.
If a pump is running for long periods, it can indicate a blocked inlet or outlet. Check for water present when it is running, as the switch could be sticking in the running position. Running dry will damage the pump, and a slow-working pump risks an overflow or other damage.
Depends entirely upon the pump and its use - if it says "continuous rated" on the pump or the instrctions with it, it can be run permanently subject to things like temperature and pump head etc., which will also be in the instructions.
A sump pump discharge line should run as far from the foundation walls as possible.
One that can run underwater.
You could use your pool pump. or get a submersible pump. it is also not difficult to siphon an above ground pool with a pool vacuum hose. all you need is somewhere to run the water to.
A sump pump should only run for 10 seconds or less, and should only cycle 2 times per hour. If it is running too long or too often, you may have a drainage issue.Ans 2 - Does your sump pump have a check valve to prevent pumped water running back to the pump ?
Its a pressurised system it will run till you turn the key back off.
The amount of time the pump should run for any pool will depend on a few things. Hotter seaons will require your pump to run about 8 hours. Running your pump in hotter seaons also require that the pump runs during the hottest part of the day. You may cut the hours to about 6, or as low as 4 during winter. Please keep in mind "bather load" or heating the pool in the winter can effect the hours your pump should run. During winter pump should be ran at night to avoid freezing of pipes
Yes
bec of long moment arm