When mixed properly with a few other componets, yes it does make a form of meth.
It sent me alternate route
Most times, nothing. This is a confusion of the real question "What happens if I mix Pool Shock and brake fluid?". Answer: smoke and then fire. Clorox and pool shock are both oxidizers - lots of oxygen in it's molecular makeup waiting to combine with something. The difference is that pool shock is 50% - 60% reactive, Clorox is only 4% - 5% reactive. Brake fluid absorbs water from the air. The pool shock reacts with that water creating heat. The heat causes the brake fluid to smoke and if it gets hot enough, it will burst into flame. Note: This is a seriously strong chemical reaction. Fire hazard, burns, smoke inhalation, dangerous chemical waste, etc. can result if you try this. You have been warned!
Mixing DOT 3 brake fluid with swimming pool shock will not create a bomb. However, it can produce toxic fumes and should never be done as it poses a serious health hazard. It is important to handle chemicals with care and use them only as intended.
Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.
3800 gals of pool water shock it with 1 gal bleach
Pool shock typically contains a higher concentration of chlorine compared to regular pool chlorine products. Pool shock is used to quickly raise the chlorine levels in the water to kill bacteria and algae, while regular pool chlorine is used for maintenance and to keep the chlorine levels stable over time.
You do not need to remove it.
No, pool shock is normally a really strong chlorine and stabilizer is like sunscreen for the chlorine
To shock a pool is to effectively increase the chlorine dosage to the max in order to exterminate a bacterial or algae problem.
shock it
Salt pools still require weekly shock maintenance, but not near the amount that a chlorine pool would need. There are Salt Pool Shock Treatments out there for your particular pool setup.