0
Add your answer:
Earn +20 pts
Alternator belt is tension to what pounds?
The alternator belt is tension to about 12 pounds. This figure is however not a static figure.
How do you adjust the alternator belt tension on diamante?
Loosen the alternator tensioner bolt. You will be able to slide the alternator either way to adjust the tension on the belt.
How do you change alternator belt on rover 25 2.0 diesel?
place a 15 mm spanner on the tensioner from under the car and rotate it clock wish to lift the tensioner then you can remove the belt
How do you tighten belt onto a new alternator.?
If it is a serpentine belt, the tension is automatically adjusted by the tension idler. If the belt is loose then the tensioner needs replacing. If it is a normal drive belt, then the alternator is mounted on a slotted bracket that allows you to adjust the position of the alternator. You can loosen the bolts and adjust the tension on the belt.
How do you adjust 99 diesel mondeo alternator belt?
Remove the drivers side wheel. Remove the inner cover. Taking an Allen wrench and tighten the tension roller against the belt.
Where is the tension release for the alternators belt?
If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.
How do you tighten alternator belt on a 93 Plymouth acclaim?
The 93 Acclaim has a serpentine belt. The tensioner below the alternator is what keeps the tension. If you have not tension I would replace the belt first and then check the tensioner.
How do you tension a belt?
if the car doesn't have an automatic tensioner than if the belt is around the alternator pully you loosen the bolt holding the alternator on and move the alternator to tighten the belt.
Is there an alternator belt adjuster on a 1994 Geo Prism 1.8?
If the alternator is driven by a drive belt, the answer is yes. You adjust the tension by loosing the bolts on the alternator mounting brackets and sliding the alternator until the proper tension, (around 1/4" deflection at mid point of the belt) is achieved. If however it has a Serpentine Belt driving the alternator, then there is no adjustment. Tension is held by the idler pulley. If it is loose then the belt is worn out, the idler tensioner is defective, or both.
Where is the tension bolt on a 1992 Chrysler new yorker alternator?
Assuming you have a serpentine belt on that 3.3L engine, the tension on the alternator would be controlled by the idler (tension) pulley. The alternator is stationary.
How do you adjust fan belt tension on a vw golf mk2?
The alternator is rotated on it's pivot to adjust belt tension.
Is there a cam belt or cam chain on 2.5 diesel range rover 1996?
Cam Belt
