Hazard lights should only be used when your car is stopped or coming to a stop. Using them while you are actually still driving can be dangerous. Other drivers will be unable to tell if you are going to change lanes or get off the road because your turn signals or 'blinkers' will not work when your hazard lights are on.
get the whole care re wired also dont turn on your hazard lights!!!
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
I have the same sound in my 2003, Pontiac Grand AM. I am unable to located were it is coming from?
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
Bad bulbs? Sockets corroded?
you should try checking the fuses and replacing the bulbs the fuses for thos lights should only be about a 10 or a 15
try the hazard warning light switch as if this fails the indicators will not operate then if not try the hazard light relay
You may have blown a fuse or a flasher.
If you already checked your bulbs then check your fuses, usually this is the case when all the lights stop working at the same time.
Stop and pull over as quickly and safely as you can
If lights light up but do not flash, then need to change the flasher, if no light at all chk all fuses first.