1. Ignition on
2. Hit the trip button (lever), until current (complete) kilometers is displayed.
3. Ignition off.
4. Ignition off, press and hold the trip button while turning ignition switch (key) to the on position, release the trip button after 5-6 seconds.
5. Ignition remaining in on position, press and hold trip button for 5-10 seconds. The trip display will 15.
6. Ignition on, trip display showing 15. Release the trip button.
7. Relax, its done.
N.B, works only on this vehicle, cannot be done earlier than required. Only reset after the timing belt and associated components have been replaced.
how to reset toyota kdn165 timing light
timing belt light hilux 1kd
see hpoc.co.uk for a post on this very question
There is a rubber grommet in the clear pane of the dash, remove it and insert a long pointed object, ie. a skewer and push the button while engine is running and the t-belt warning light will go out. This should only be done if timing belt has been replaced, engine failure may result if belt is not replaced.
timing belt light rest
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
how to reset oil timing on 1990 toyota
there is a little bung on your dash board beside your trip meter pull out bung and deep in there you will see a little button get a needle and push the button easy as that timing light out
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
how do i reset timing belt light on 1hz
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
To rest a Toyota surf 1kz-te engine timing belt light, first determine which generation surf it is. If it is 2nd generation the reset is very simple. Using a slender item such as a pencil you can easily push the reset button on the clock.