You need to repair the problem that set the light and then use an OBD2 scan tool to reset the light. If you do not fix the problem the light will just come back on.
Scroll to the engine oil life display. When you are on the engine oil life display, hold in the scroll button until the engine oil life goes to 100 percent.
How to reset service light on a 2004 grand am
Reset with an OBD2 scan tool, after the repair of whatever triggered the light.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
disconnect the negative battery cable for 10 mins this will reset computer it will do it for sure
GM vehicles do not use inertia/reset switches.
I have a 2006 Pontiac Solstice. I disconnected the battery terminal for about 45 minutes. When I reconnected it the light stayed off. Good luck
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
You can usually disconnect the battery cable for about 15 seconds and reconnect it to reset the engine light. Check the fuse box for a(red) resert button - to reset the engine light disconnect battery for 15 minutes , the red reset button on fuse panel is for motor oil change reminder reset