The headlight assembly contains all the light bulbs on one piece of plastic, but not the turn signal. In order to get to the assembly, you need to remove the battery. Also, there are 2 black plastic covers held on by 4 screws. Remove those screws (philips) and the covers. Behind the headlight assembly you will see a large black piece of plasic with two metal bands over it on each side. These are hard to get off but push them off of the pastic, they snap in place so it can be hard and noisy when they unlatch. This will let you take off the backing of the main headlight. Right beside that backing is a long, rectangular backing that has a plastic snap at the top. You may need a screwdriver or a chisel to pry this latch off, but push down on the plastic latch and pull the backing off. The top of this housing has the turn signal. Pull the entire turn signal housing with the wires just an inch or so. Use a set of pliers to unplug the wiring from the bulb housing. Once that's done, pull the bulb housing out, undo the small metal latches on the side of the bulb, and pull the bulb out. You may need a set of pliers for that. Replace the bulb, the bulb assembly, and plug in the wiring assembly. Once again, pliers may be needed for that. Replace the plastic backing and the main headlight backing. .
The 2002 Volkswagen Jetta has 53.7 in. of front shoulder room.
The 2002 Volkswagen Jetta has 41.5 in. of front leg room.
The 2002 Volkswagen Jetta has 38.6 in. of front head room.
The front track of the 2002 Volkswagen Jetta is 4 ft. 11.6 in. (59.6 in.).
how do you replacethe control arm left side in a 2002 vw jetta
The 2002 Volkswagen Jetta has front wheel drive.
This video will show you how to replace the grill on your 99-04 jetta. http://www.youtube.com/watch?v=14G3sMJ71Wk
on the front i think
The 2002 Volkswagen Jetta is 5 ft. 8.3 in. (68.3 in.)12V front and 12V cargo area power outlet(s) wide.
Unplug the whole light assembly from the bottom front of the car it just pops out to replace the turn signal bulb-same on the rear but you have to remove the trunk lining first.
Remove headlight assembly to access bulb/socket.
How do you replace a turn signal bulb in a 1998 cavalier