Open the rear hatch. This will reveal the screws that hold the tail light housing and lens to the rear pillar. Remove the screws and carefully lift the tail light housing away from the pillar. You will see the socket inserted into the back of the housing. Slightly turn the socket to loosen the weather-tight gasket and pull the socket straight out revealing the bulb. Replace with the proper bulb. Re-assembly is the reverse of removal.
how much does it cost to replace brakes rotors on honda crv
Youtube has a video showing how to replaced the rear pads for a 2003 crv (02 crv is the same as the 2003 crv). At youtube type in 2003 Honda crv brake change. The video is very good.
Open the hatch - remove the protective cover from the housing - twist out the bulb holder - remove and replace bulb - re-install in the reverse order.
You reset it with an OBD2 scan tool.
Remove the small plugs covering the screw holes (if so equipped) - remove the two screws and remove the protective cover - twist the bulb holder counterclockwise and pull it from the housing - replace bulb. Assembly is the reverse of removal.
how do you replace a honda crv licence plate bulb on a 2004
how hard is it to replace a rear wheel bearing 1999 Honda crv. this crv does not have rear axle's in it. thank you
would a 2004, 2005, Honda crv rear end differential fit Honda 2007 crv.
7443 See sources and related links below for complete light bulb list and bulb options.
any known problems with 2007 honda crv
+50mm
You can call a locksmith to unlock your Honda CRV 2007 if you have lost your keys. Locksmiths have special tools that allow them safely unlock your car without causing damage. You can not use tape to unlock your Honda CRV 2007.