1985 Ford F-150 brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
1985
On the brake pedal arm.
The only way to reset the sensor light on a 1985 Nissan pickup truck is to disconnect the sensor wiring. After 60 seconds, put the wiring back in place.
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
the brake light fuse is located where the brake pedal is at... just take the cover that it has above the brake pedal and you're gonna see fuses on your left....
It is mounted on a bracket under the dash at the brake pedal. From there it is self explanatory.
look under driver side by ddoor,unscrew lock nut and tighten other screw until brake is good,then tighten lock nut.
With an ohmeter or a self-powered test light. Hook the two leads of your tester to the terminals on the brake light switch. Push down on the brake pedal and if the light stays off or the meter stays at infinity, the switch is bad.
Usually on the upper end of the brake pedal under dash area
What is the gear ratio for a 1985 CHEVROLET K10 pickup
This happened to my 1985 Lebaron Conv and all the car needs is a new brake light switch mounted on the brake pedal under the dash. Problem solved!
no, just one solid one, also used as the blinker.