First you have to disconnect the power from the battery. Then you remove the belt,and all electrical connections. Then you take out the bolts holding it on the brackets and bring it out from under the car. - Disconnect Battery
- Remove Air filter intake components.
- Remove fuel hose to carb (maybe)
- Remove 12mm upper alternator mount bolt
- Dissconnect 10mm Alternator positive connection.
- Dissconnect Alternator connector plug.
- Remove 2*12mm lower alternator mount bolts.
- Remove 2*10mm lower alternator shield bolts.
- Remove 2*14mm exhaust pipe to manifold bolts.
-Wiggle the old alternator out and the new in...trust, it works
IF YOU INTENDED TO REPLACE THE ALTERNATOR BELT...
- Slacken the underside 10mm main belt tension pulley to allow alternator belt R&R.
how do you replace 1997 alternator belt
If the engines are the same size then yes (ie) 3 cylinder 1.0L to 3 cylinder 1.0L.
Yes it shoud fit. Geo metros had the same headlights from 1995 - 1999
Remove the cables from the alternator. Remove the wiring harness. Remove the alternator belt. Remove the retaining bolts. Reverse the process to install your new alternator.
can someone tell me how to adjust timing on a geo metro 1996
Where is the tensioner
in the alternator
take one off at a time, and replace with a new one. then so on.
yes
You have to find the alternator then look at where it is connected to the motor there will be a slide mechanism that you will have to loosen which will release the slack on the belt so you can get it off.
yes.... but why would you want to
it should be able to