== == US built trucks use a Neapco 1-0430 to replace factory staked-in joints on 4 cylinder models. Japan built 4 cylinders and V6 models use different ones, usually a Precision 369.
== == you can't replace it you have go to a drive shaft company to replace it.. it's press on about $100 for both joint and balance drive.
how to replace lower ball joints on 1995 4 wheel drive Nissan truck
The cost to replace a universal joint on a 2500 Dodge truck will vary depending on if you replace it yourself or take it to a shop. The cost for the part can vary depending on location and can cost from about $12.00 to $20.00. At a shop, the cost will include the part plus labor.
you will have to replace.
The way to replace a door handle on a Nissan pickup truck can vary depending on the year of the truck. There are several tutorials available online.
replace it
You might need a new u joint.
Must not be installed correctly. If the joint is not perfectly centered it will vibrate.
I heat the yoke eye and joint cap with a torch until the plastic oozes out then press the joint out as usual. The replacement joint will have regular retaining clips to hold the joint cap in place.
A bad universal joint is one possibility.
you may have a bad thermostat,replace and see.
Could be a universal joint gone bad.
disconnect it from your brake pedal lever.