Remove the filter cover. unhook the two fuel lines behind the primer bulb. Remove the two screws (inset star) that hold the carburetor, then gently rotate the filter base to expose the back of the primer bulb push the two retaining tabs and remove the primer taking notice which fuel lines go into it, one is longer than the other. Replace in reverse order and replace gaskets if damaged. Paul
Wiki User
∙ 15y agoThere is a primer on a Toro Recycler. This will have to be drain first then replace the fuel bowl.
Yes, unless you have an older Homelite from the late 90's, all of the expand-it attachments are universal, which, in my opinion, makes the expand-it a very attractive option. The attachments fit Toro, Ryobi, Poulon, Homelite, Troy-Bilt, Huskqvarna, etc.
you would take off the cover and expose the recoil spring/shaft then detach the string and put the new one on
There is an orifice in the primer assy. in the carb. that is plugged. You will have to remove and clean the primer assy.
I purchased my Toro weedeater in 2007. It uses a 50:1 gas/oil ratio.
Don't know that a leaking primer bulb can be repaired. Most likely, you have to replace it. You don't want to forget the routing of the fuel lines!! You might want to make a drawing of the routing before you remove the primer bulb.
50 to 1 50 to 1
Black and Decker is one of the best lawn trimmers available with proper care they can last a lifetime.Another good brand too check out would be Toro - Electric Trimmers.
close to primer bulb... has cup shape design
how to replace plug wire on a toro mower
A Toro 38435 is a snowthrower manufactured from 1997 to 1999.
Got a toro 521 wont blow snow after 2 feet whats up