where are the drain holes on the rear part of the sunroof and how do i clear them
Type your answer here... How do you remove ignition switch from 1992 ford explorer?
the line or the pump?
First remove the steering wheel, remove the torx screws and remove the house, remove the signal switch and the wiper switch, remove the torx screws and?æremove the ignition switch. Put in the new switch and replace everything in reverse.?æ
i have the same problem on acura opens but will not close it closed once may be loose wire or switch is bad.
I want remove engine out from car and transmission
Begin by removing the retaining ring at the top of your 1992 Chevy ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
there is a cover behind the switch stalk clip off then you will see the plug from the wiper switch stalk unplug then to remove switch turn switch and pull out stalk switch
did you check ur fusebox to see if the fuse burnt out ?? , or ur sunroof motor is bad
your headlight switch needs to be replaced. My Lincoln had the same problem, it all stems from the auto dimmer feature...replace the headlight switch (mine was 70-100 dollars) and your lights will work fine.
YES.
If the reservoir is blocking the way, then it will have to be removed.