it is located on the inlet manifold below throttle body you need to remove manifold and remove sensor from underside
remove intake manifold.
You will need to remove the air intake manifold under this you will find the glow plugs Can you help I am a novice and not sure how to take to air intake manifold off? thanks
There is 2 of them. and they are under the intake manifold. You will have to remove the intake manifold to get to them.
Remove the intake manifold retaining bolts from your 1993 Mercedes-Benz manifold. Remove the old manifold gasket. Clean the surface and put the new gasket on.
Remove the intake manifold, exhaust manifold, and then remove the head.
Basically you remove the throttle body, fuel rail, and anything else that is plugging into it, then unbolt it. You need to get a shop manual however, because there is a specific bolt pattern you need to use to avoid damage.
Remove the intake manifold retaining bolts from your 1996 Chevy Astro Van. Remove the manifold gasket and clean the surface. Reverse the process to install the new intake manifold gasket.
under the intake manifold. you have to remove all intake hose and intake manifold itself to get to the starter.
TNT
To remove the intake manifold on a 2004 Mitsubishi endeavor, you should take it to a mechanic. An authorized dealer will also fix it for you.
They are underneith the intake manifold. You can not see are get to them until you REMOVE the INTAKE manifold.